Freeshipping
Browse Categories
Search
Browse by Manufacturer
Shopping Cart
Your cart is empty.
Mailing Lists




 Freeshipping
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
 


Combat Sport Supply


All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange.

Polar Star Fusion Engine Generation 3 for V3 Gear Box AK

Polar Star Fusion Engine Generation 3 for V3 Gear Box AK-47
MSRP: $550.00
CombatSportSupply: $499.95
You Save: $50.05 (9 %)
Item Number: PSFUSIONGEN3V3
Manufacturer: Polar Star
Manufacturer Part No: FEV3G3

PolarStar Airsoft V3 Gen3 Fusion Engine Electro-Pneumatic Gearbox Kit

Have you ever dreamed of Polarizing your MP5, G3 or SCAR? With the introduction of the GEN3, now you can! At first glance the GEN3 FEV2 looks very much like the GEN2 and, for the most part, the two are quite similar. However, unlike its predecessor, the FEV2 GEN3 is no longer just for the M4/M16 series rifle. We applied the same concept used with our Version 3 Fusion Engine™ so that it is now able to interface with the selector plate and related components of your existing AEG’s gearbox. This makes it possible to adapt the engine for use in multiple rifle models which share the Version 2 gearbox without any major modification.

The FEV2 GEN3 will come complete with a M4/M16 series trigger and steel selector plate so that it can be installed into any M4/M16 series AEG which is Tokyo Marui compatible. However, by installing a different nozzle or rifle specific conversion kit, you will be able to expand the number of rifles it will be compatible with. In most cases all you’ll need to do is change out the trigger and selector components with ones from your AEG, install a different Fusion Engine™ nozzle, and the engine is ready to use in a completely different model of rifle.

The internal operation of the GEN3 FEV2 and the GEN2 FEV2 cylinder assembly are exactly the same and share many of the same parts, so it offers the same stellar downrange performance and rock solid reliability as its predecessor. This GEN3 does however feature a new side plate design to accommodate the AEG selector plate and is equipped with a new electronic switchboard. One advantage to this new design is that the switchboard offers a wider contact point with the selector plate to allow for varying tolerances in the rifles selector assembly making for improved out-of-the-box compatibility with an increased number of rifle brands.

As requested by many of our fans, the FEV2 GEN3 will come standard with our newly redesigned “Milsim Manifold”. This feature enables the user to install an optional 90 degree fitting inside of their engine allowing the air line to be routed to the rear of the engine and exit through the buffer tube sling plate on an M4 series rifle.

As with all of our engine models, you can quickly change and adjust key functions of the engine via the on-board FCU (Fire Control Unit) which is no bigger than an AEG's MOSFET and can easily fit inside of a rifles battery compartment along with a small Li-po battery. Using the FCU's five position joystick and LCD display you will be able to easily adjust such functions as the systems cyclic rate, fire modes and nozzle timing on the fly.

With the Fusion Engine™ in your rifle you will also be able to adjust its muzzle velocity via the remote air rig (sold separately). Adjusting the PSI output on your air rig will allow you to fine tune your rifles muzzle velocity so you will always be able to get it exactly where you want it. And then for larger velocity changes we offer a series of air nozzles with varying bore sizes to shift the velocity adjustment range up or down to best meet your requirements.

The best part is that our system is extremely user friendly. Even if you have only the basic understanding of an airsoft rifle, you will find that operating and manipulating this system is very simple and does not require a degree in airsoft engineering to figure out.




Key Features

  • Designed, manufactured and built in the U.S.A..
  • Assembled from CNC machined aluminum components.
  • New GEN3 design now interfaces with AEG triggers and selector plates for cross compatibility with many different models.
  • Capable of functioning in damp and sub-freezing climates without affecting performance or reliability.
  • User selectable Semi/Full Auto, Semi Auto Only and Variable Burst modes.
  • Open Bolt and Closed Bolt firing modes.
  • Independently adjustable velocity and cyclic rate.
  • Auto Switch mode allows for proper selector configuration for specific models.
  • Interchangeable air nozzles to shift the velocity adjustment range up or down.
  • Adjustable nozzle dwell and return to battery times to optimize feeding from any magazine.
  • Easy to use Fire Control Unit (FCU) with LCD display and five position joystick.
  • Uniform shot-to-shot air volume discharge allows for unmatched velocity consistency.
  • Instantaneous trigger response. Faster than an AEG with a Li-po!
  • Interfaces with stock AEG barrel/hop-chamber allowing for aftermarket barrel upgrades and the use of traditional AEG magazines.

    Required for operation: Complete TM Spec AEG rifle (less gearbox and motor), Air Rig, HPA Tank, Battery

    (CO2 and Propane cannot be used to power the Fusion Engine™. Using liquid propellants such as this can result in damage to the system.)
- See more at: http://polarstarairsoft.com/products/fusion-engine/fusion-engine-v2-gen3.html#sthash.NVjRX7m6.dpuf

Specifications

Fire mode/s Full Auto, Semi Auto, Variable Burst
  • FE Profile: Version 3
  • Included FE Nozzle Type: AK Series, Blue (FE-NZ-BLU-AK)
  • Included Selector Plate: AK Series
  • Cyclic Rate: 500 RPM to 1,800 RPM
  • Fire Modes: Semi / 2 to 9 Shot Burst, Semi / Full Auto, Semi Only
  • Power Source: HPA (High Pressure Air via remote air rig)
  • FCU Battery: 7.4v Lipo w/ JST Connector (BAT-LIPO-74-250)
  • FCU Voltage Input Range: 6.8v to 12v
  • Electronics: REV2
  • PSI Operating Range: 80 psi. to 120 psi.
  • Build Material: Aluminum
  • Weight: .75 lbs
- See more at: http://polarstarairsoft.com/products/fusion-engine/fusion-engine-v3-gen3.html#sthash.JL1p7YcO.dpuf
 

Description

The PolarStar Gen3 V3 Fusion Engine takes place of any Ver. 3 AEG Gearbox as a direct drop-in. It is powered via a High Pressure Air (HPA) setup and only requires a small battery (7.4v-9.6v NiMH or Lipo recommended) to power the onboard computer known as the Fire Control Unit (FCU). This kit comes with the necessary core parts to convert your AEG AK to the Fusion System, and can be used with other Ver 3 Airsoft AEGs by replacing the selector plate, trigger and Fusion Engine nozzle (additional FE nozzles, triggers and selector plates not included). HPA stabilizer and tank required but not included.

The Fusion Engine is completely adjustable via the FCU and by varying the pressure from the HPA system (90-120 PSI). The Fusion Engine Kit comes equipped with PolarStar's Blue Nozzle (FPS listed below). Optional Color-coded nozzles are available to be able to move the Maximum FPS Range up or down.

The Fusion Engine is compatible with AEG style Hopups and Inner Barrels allowing the use of standard upgrade parts. A great thing about the Fusion Engine is that stripped gears, blown motors, fried batteries, and just about every other problem with AEG's no longer exist. Say goodbye to hundreds of dollars on maintenance and countless hours fixing your gun!

HPA system not included

Features:
- 100% Engineered and Assembled in the USA!
- Revolutionary Electro-Pneumatic Fusion Engine allows for an HPA setup in a compact space
- Instant Trigger Response (literally, instant!)
- Complete control of the system via the Fire Control Unit (FCU)
- Fully Adjustable FPS and Rate of Fire
- User adjustable Semi/Full-Auto, Semi-Only, 2rd-9rd Burst, and Open Bolt and Closed Bolt Firing modes
- Consistent performance, regardless of the temperature
- Fine Tuning of the Nozzle Dwell allows for accurate BB feeding with any magazine
- Maximum FPS limit can be raised or lowered with optional Color-coded Air Nozzles (Not included)
- Uses Standard AEG Hopup and Inner Barrel design allowing for AEG upgrade parts and the use of standard AEG magazines
- New GEN3 design interfaces with all V3 AEG triggers and selector plates for cross compatibility with many different models and platforms


Compatibility:
For use with any Tokyo Marui, CYMA, JG and other compatible Ver. 3 Gearbox Airsoft AEG Rifles. Kit comes with AK selector plate, trigger, and FE nozzle (other Ver. 3 AEG selector plates, triggers and FE nozzles not included)

Nozzle Color: Blue
Max Velocity: (0.20g BB @ 120 PSI)
275mm Inner Barrel: 380 FPS
380mm Inner Barrel: 405 FPS
509mm Inner Barrel: 435 FPS
*FPS listed is approximate. FPS will increase as barrel length increases

Rate of Fire: 500 RPM - 1800 RPM, Adjustable
PSI Operating Range: 90-120 PSI (Do NOT exceed 120 PSI, otherwise you may damage the internals)
Power Type: High Pressure Air Tank (Tank and Regulator System not included)
Package Includes: Pre-Assembled Fusion Engine, FCU
Battery: 7.4v-9.6v NiMH or Lipo (Not included).

Key Features
Designed, manufactured and built in the U.S.A..
Assembled from CNC machined aluminum components.
New GEN3 design now interfaces with AEG triggers and selector plates for cross compatibility with many different models.
Capable of functioning in damp and sub-freezing climates without affecting performance or reliability.
User selectable Semi/Full Auto, Semi Auto Only and Variable Burst modes.
Open Bolt and Closed Bolt firing modes.
Independently adjustable velocity and cyclic rate.
Auto Switch mode allows for proper selector configuration for specific models.
Interchangeable air nozzles to shift the velocity adjustment range up or down.
Adjustable nozzle dwell and return to battery times to optimize feeding from any magazine.
Easy to use Fire Control Unit (FCU) with LCD display and five position joystick.
Uniform shot-to-shot air volume discharge allows for unmatched velocity consistency.
Instantaneous trigger response. Faster than an AEG with a Li-po!
Interfaces with stock AEG barrel/hop-chamber allowing for aftermarket barrel upgrades and the use of traditional AEG magazines.



Required for operation:

Complete TM Spec AEG rifle (less gearbox and motor), Air Rig, HPA Tank, Battery

Required Equipment:
The Fusion Engine is a very low maintenance, advanced system that requires a few necessary parts:

  • M4/M16 or other Ver. 2 AEG Rifle (replaces the original gearbox)
  • HPA Tank
  • Stabilizer/Regulator Remote Line
  • Small Battery (7.4v-9.6v recommended. Can be LiPo or NiMH)
    *The above items are not included

(CO2 and Propane cannot be used to power the Fusion Engine™. Using liquid propellants such as this can result in damage to the system.)
- See more at: http://polarstarairsoft.com/products/fusion-engine/fusion-engine-v2-gen3.html#sthash.NVjRX7m6.dpuf

*This Product may be excluded from some coupon code or other promotions due to manufacturer MSRP policy*

Key Features

  • Designed, manufactured and built in the U.S.A..
  • Assembled from CNC machined aluminum components.
  • New GEN3 design now interfaces with AEG triggers and selector plates for cross compatibility with many different models.
  • Capable of functioning in damp and sub-freezing climates without affecting performance or reliability.
  • User selectable Semi/Full Auto, Semi Auto Only and Variable Burst modes.
  • Open Bolt and Closed Bolt firing modes.
  • Independently adjustable velocity and cyclic rate.
  • Auto Switch mode allows for proper selector configuration for specific models.
  • Interchangeable air nozzles to shift the velocity adjustment range up or down.
  • Adjustable nozzle dwell and return to battery times to optimize feeding from any magazine.
  • Easy to use Fire Control Unit (FCU) with LCD display and five position joystick.
  • Uniform shot-to-shot air volume discharge allows for unmatched velocity consistency.
  • Instantaneous trigger response. Faster than an AEG with a Li-po!
  • Interfaces with stock AEG barrel/hop-chamber allowing for aftermarket barrel upgrades and the use of traditional AEG magazines.

    Required for operation: Complete TM Spec AEG rifle (less gearbox and motor), Air Rig, HPA Tank, Battery

    (CO2 and Propane cannot be used to power the Fusion Engine™. Using liquid propellants such as this can result in damage to the system.)
- See more at: http://polarstarairsoft.com/products/fusion-engine/fusion-engine-v2-gen3.html#sthash.NVjRX7m6.dpuf

Have you ever dreamed of Polarizing your MP5, G3 or SCAR? With the introduction of the GEN3, now you can! At first glance the GEN3 FEV2 looks very much like the GEN2 and, for the most part, the two are quite similar. However, unlike its predecessor, the FEV2 GEN3 is no longer just for the M4/M16 series rifle. We applied the same concept used with our Version 3 Fusion Engine™ so that it is now able to interface with the selector plate and related components of your existing AEG’s gearbox. This makes it possible to adapt the engine for use in multiple rifle models which share the Version 2 gearbox without any major modification.

The FEV2 GEN3 will come complete with a M4/M16 series trigger and steel selector plate so that it can be installed into any M4/M16 series AEG which is Tokyo Marui compatible. However, by installing a different nozzle or rifle specific conversion kit, you will be able to expand the number of rifles it will be compatible with. In most cases all you’ll need to do is change out the trigger and selector components with ones from your AEG, install a different Fusion Engine™ nozzle, and the engine is ready to use in a completely different model of rifle.

The internal operation of the GEN3 FEV2 and the GEN2 FEV2 cylinder assembly are exactly the same and share many of the same parts, so it offers the same stellar downrange performance and rock solid reliability as its predecessor. This GEN3 does however feature a new side plate design to accommodate the AEG selector plate and is equipped with a new electronic switchboard. One advantage to this new design is that the switchboard offers a wider contact point with the selector plate to allow for varying tolerances in the rifles selector assembly making for improved out-of-the-box compatibility with an increased number of rifle brands.

As requested by many of our fans, the FEV2 GEN3 will come standard with our newly redesigned “Milsim Manifold”. This feature enables the user to install an optional 90 degree fitting inside of their engine allowing the air line to be routed to the rear of the engine and exit through the buffer tube sling plate on an M4 series rifle.

As with all of our engine models, you can quickly change and adjust key functions of the engine via the on-board FCU (Fire Control Unit) which is no bigger than an AEG's MOSFET and can easily fit inside of a rifles battery compartment along with a small Li-po battery. Using the FCU's five position joystick and LCD display you will be able to easily adjust such functions as the systems cyclic rate, fire modes and nozzle timing on the fly.

With the Fusion Engine™ in your rifle you will also be able to adjust its muzzle velocity via the remote air rig (sold separately). Adjusting the PSI output on your air rig will allow you to fine tune your rifles muzzle velocity so you will always be able to get it exactly where you want it. And then for larger velocity changes we offer a series of air nozzles with varying bore sizes to shift the velocity adjustment range up or down to best meet your requirements.

The best part is that our system is extremely user friendly. Even if you have only the basic understanding of an airsoft rifle, you will find that operating and manipulating this system is very simple and does not require a degree in airsoft engineering to figure out.




Key Features

  • Designed, manufactured and built in the U.S.A..
  • Assembled from CNC machined aluminum components.
  • New GEN3 design now interfaces with AEG triggers and selector plates for cross compatibility with many different models.
  • Capable of functioning in damp and sub-freezing climates without affecting performance or reliability.
  • User selectable Semi/Full Auto, Semi Auto Only and Variable Burst modes.
  • Open Bolt and Closed Bolt firing modes.
  • Independently adjustable velocity and cyclic rate.
  • Auto Switch mode allows for proper selector configuration for specific models.
  • Interchangeable air nozzles to shift the velocity adjustment range up or down.
  • Adjustable nozzle dwell and return to battery times to optimize feeding from any magazine.
  • Easy to use Fire Control Unit (FCU) with LCD display and five position joystick.
  • Uniform shot-to-shot air volume discharge allows for unmatched velocity consistency.
  • Instantaneous trigger response. Faster than an AEG with a Li-po!
  • Interfaces with stock AEG barrel/hop-chamber allowing for aftermarket barrel upgrades and the use of traditional AEG magazines.

    Required for operation: Complete TM Spec AEG rifle (less gearbox and motor), Air Rig, HPA Tank, Battery

    (CO2 and Propane cannot be used to power the Fusion Engine™. Using liquid propellants such as this can result in damage to the system.)
- See more at: http://polarstarairsoft.com/products/fusion-engine/fusion-engine-v2-gen3.html#sthash.NVjRX7m6.dpuf

Product Reviews

(0 Ratings, 0 Reviews)